Was sind die besten Möglichkeiten, um Ihre mechanischen Systeme vor Verschleiß zu schützen?

When it comes to material selection, the best way is to follow the engineering standards like ASME, API etc..during the FEED study itself. If right materials are chosen for operation, it will not wear easily. For instance, stainless steel bolts can be used instead of regular GI bolts for marine applications. Similarly if we look in the case of Mechanical Seals, the right material should be chosen for o-rings because if the operating temperature and pressure are not considered it will lead to the premature failure of Mechanical seals and hence lead to costly repairs. So the remedy is to properly study the conditions or process requirements and then select suitable materials for construction.

The Original Equipment Manufacturer or OEM designs their equipment using specific materials and finishes to give the correct performance and wear characteristics for the product they have designed and placed on the market, so it’s imperative to use the right materials such as OEM spare parts to ensure the longevity of your equipment in service.

Ensure the mechanical seal is installed correctly according to the manufacturer's instructions. This includes proper alignment, lubrication, and torque settings. Improper installation can lead to premature seal failure. Keep the surrounding environment clean and free from contaminants. Contaminants such as dirt, dust, or debris can cause abrasion and damage to the seal faces, leading to leakage. Implement proper filtration and maintenance practices to minimize the ingress of contaminants. Ensure the mechanical seal is adequately lubricated and cooled. Improper lubrication can cause excessive friction and heat generation, leading to seal failure. Follow the manufacturer's recommendations for lubrication types and intervals.

The key to reduce wear and tear is to go for the right materials upfront . Follow the OEM s instructions while installing . Proper environment and PM techniques to be applied . Most important to send it back to the OEM shop for refurbishment as this ensures proper life of the equipment and reduce wear and tear .

Preventive maintenance schedule and corrective maintenance need to perform as soon as possible. Make sure spare part is available for any emergency shutdown.

Having a robust preventative maintenance programme in place will help. Regular periodic inspections which are logged and accessible and available to all levels of the team will also help. Lastly, using the correct manufacturers spare parts will over time keep costs down. Remember the old adage - buy cheap buy twice!

Lubrication and Structure Analysis Mechanical components especially rotating parts should be lubricated most often either by oil or grease in the right amount or proportion. Structure Analysis is key in preventing mechanical components from wear or tear. Mechanical components should be sandblasted on a periodical basis and coated with anti rust or corrosive substance to prolong the life of the Mechanical components.

#Proper machinery operation according to laid down operational procedures/operating instructions #Regular maintenance, routine, lubricate, check certain parameters such as temperatures, vibration, imbalance, alignment......, check, just check and clean! (in accordance to Standard Operation Procedures - SOPs)

ALWAYS be sure to use the OEM recommendation for lubricant. Whether it is a gearbox or a bearing or whatever. Using the proper lubricant and applying it at the OEM recommended frequency and quantity is vital to maximizing the life of your equipment. This is something that can be easily forgotten or not taken seriously. It DOES matter. More than you think. If you have unexpected wear, heat, or burned material visually or smell.. most likely your machinery is not being lubricated. You need a thorough plan and a checklist to ensure it is being handled.

* Ensuring that fasteners are tightened correctly by first hand tightening and then using a tourqe wrench,tighten to the correct newton- meter. * During maintenance or servicing of your mechanical equipment, ensure parts that are replaced is within the correct operating tolerances. * Ensure that correct lubricant is used. *Also ensure that equipment is correctly operated.

Always refer to the Original Equipment Manufacturers (OEM) documentation ensure equipment is lubricated and cleaned on a regular basis to ensure that it’s always fit for use and that it performs how the OEM intended to operate. You should also follow the OEM’s guidelines on pre and post use inspection, coupled with any pre planned maintenance or mandatory inspection regimes to ensure equipment and machinery remains fit for purpose, safe and can be utilised successfully for the duration of its service life.

. Regular Maintenance: Implement a scheduled maintenance program to ensure that all components are checked, cleaned, and lubricated as needed. This helps prevent excessive wear and can catch any potential issues before they become major problems.

When it comes to lubrication, effective preventive maintenance programmes should be in place and ensure that it is being followed. Also proper instructions should be given to the technician or person in charge, on how to lubricate based on manufacturer recommendation. For example, consider the greasing of electric motor bearings. The personnel should be aware how many shots of grease will be injected onto the bearings and in what frequency. If the lubrication amount is less or more than required, both will have adverse effects on the machinery. So the best way is to ensure proper preventive maintenance programmes.

Prior to this a Target Maintenance Program should be pursued to highlight specific areas where “wear and tear” are most likely. Then during regular maintenance intervals those areas are given greater attention or are replaced, preempting breakdowns. For example: on a backhoe the pins that hold the bucket on are the greatest risk to operational failure, not the pins on the rest of the boom or stinger. They should be given the most attention. As a general guide a Target Maintenance Program can be driven by watching for 3 things: (TWD) areas that have the greatest Temperature swings, areas that are exposed to Water, and areas that collect Dust.

Lubrication, proper lubricants are very-very vital tools to save downtime & save machines from failures. I would stick to manufacturer instructions in this.

The company I work for uses PM's to carry out regular Ultrasound, Vibration Analysis, Thermography and MCT. The frequency of this is done by how critical the equipment is to the plant (monthly, bi monthly or quarterly). By doing this we have saved thousands of pounds in reduced downtime of machines as we get the issues fixed when plant is on shutdown. All production machines are serviced on a regular basis, with every item being checked over a week and faulty parts being replaced or rebuilt. We also use the above monitoring techniques to check for any non observes problems.

By scheduling PM plans ,Carrying frequently Visit of machines, if something find abnormal timely report to Concerned authorities for to prevent from heavy damage or breakdowns .

Automatic lubrication system and condition monitoring whenever it's possible. Of course, respecting manufacturer's instruction. Preventive and proactive.

Protect mechanical systems: Regular maintenance, proper lubrication, temperature control, filtration, alignment, and balancing are key. Use vibration analysis, environmental protection, operator training, safety shutdowns, predictive maintenance, spare parts inventory, documentation, continuous improvement, corrosion prevention, and load management. These practices ensure longevity, reduce downtime, and cut maintenance costs.

In order to optimize the service life, i.e. the time until failure of a component or system, the environment of the component (temperature, contamination, oil, etc.) should be taken into account when repairing the system in order to check whether other materials, e.g. stronger, more elastic, etc., are more suitable.

I have been lucky to be able to go on courses that have greatly helped me in understanding and bettering my techniques in the field of ultrasound and vibration analysis. I am a CAT I Ultrasound Analysis (UCAT-I) and CAT I Vibration analysis (VCAT-I)

An important part of education and training is making sure that operators and technicians have access to the manuals for the equipment being used. Nobody can remember every detail no matter how much training they have had. It is always a good idea to have the manual on hand when performing maintenance tasks.

All these tips are good to protect your mechanical system from wear and tear, but only from pure maintenance view! I believe protecting the system require a zoom out. Let me clarify: - What is the impact of the system design on the wear and tear? It is obvious that well designed systems can be protected easily. - What about the quality of installation and commissioning? Are you using Laser Alignment Tools? If not, think about it because the impact of quality alignment is directly proportional to tears and wear, and might be almost as impactful as lubrication. - How about the impact of the operation on the wear and tear? Remember to operate within the capacity, and according to the manufacturer instructions. Be Safe.

the importance of implementing vibration monitoring systems to detect and measure excessive vibration levels. By continuously monitoring vibrations, potential issues such as misalignment, imbalance, or worn-out components can be identified early on. Vibration sensors are installed strategically, and the collected data is analyzed to assess severity, detect abnormal patterns, and determine the root causes of excessive vibration. Prompt identification of problems allows for timely intervention, preventing further damage, reducing the risk of breakdowns, and prolonging the lifespan of mechanical systems. Vibration monitoring is particularly crucial for critical systems, enabling proactive maintenance and minimizing disruptions.