Nanochon announces our new manufacturing partnership with The LaunchPort in Baltimore! This new partnership will expand our production capabilities in preparation for higher volume requirements for our clinical trials and future commercial launch. Launchport will support our development efforts by offering tremendous expertise in medical device 3D printing, commercial ready production quality and scalability. We're excited to have the opportunity to work with and learn from an incredibly knowledgeable team who will play a key role in manufacturing strategy. #OrthopedicCare #AdvancingOrthopedics #SportsTech #BioTech #Launchport https://lnkd.in/gTM4n-sD
Nanochon
Biotechnology Research
Washington , DC 2,122 followers
Nanochon is developing highly effective, minimally invasive and low cost solutions for cartilage loss and damage.
About us
At present, there is an established clinical standard for treating joint disease: the total joint replacement. Yet, while the surgical devices and techniques used to implant them have been largely perfected, today’s standard replacement joints are very invasive, and not permanent. The lifespan of common replacement joints limits their effective use in patients aged 55 or older. This leaves patients between ages 18 and 55 suffering from cartilage damage, traumatic injury, or early stage cartilage loss with limited treatment options. Nanochon, is developing an implant designed to not only replace lost and damaged cartilage, but also to encourage new tissue growth. Using 3-D printing and a novel material, the Nanochon implant is a sturdy medical advancement that is both an orthopedic load bearing implant as well a tissue growth scaffold. The Nanochon implant has the potential to deliver faster and more successful recoveries for patients, while reducing costs to health providers, payers, and patients. Nanochon’s aim is to set a new clinical standard for cartilage restoration.
- Website
-
http://www.nanochon.com/
External link for Nanochon
- Industry
- Biotechnology Research
- Company size
- 2-10 employees
- Headquarters
- Washington , DC
- Type
- Privately Held
- Founded
- 2016
- Specialties
- sports medicine, orthopedics, medical devices, joint repair, cartilage , tissue engineering, and 3D printing
Locations
-
Primary
Get directions
13th PL NW
Washington , DC 20012, US
Employees at Nanochon
Updates
-
Nanochon reposted this
“If we were to bet on any young entrepreneur, Alyssa Huffman would be at the top of the list.” - Orthopedics This Week 12/18/23
⏰23 HOURS LEFT⏰ ALLUMIN8 is focused on reducing the global reoperation rate for spine… with platform 3D printed, porous technology designed to transform #orthopedic, #dental, & #veterinary implant design with our #TherapeuticHardware! Join us in the challenge to create a better biomechanical and physiological environment for diagnostic, treating and healing through hardware! ALLUMIN8 is Introducing a new category of Therapeutic Orthopedic & Spine 3D Hardware designed to reduce global reoperation rates. Register today! https://lnkd.in/guVCJgMd #venturecapital #seriesA #fundraising #orthopedics #orthopedicsurgery #orthopedicimplants #medtech #spinesurgery Drue DeAngelis TJ Halvorson
MSK Innovations is excited to announce our lineup for December 4th's Pitch Event! Nanochon - Benjamin Holmes, CEO Nanochon is a medical device company focused on developing innovative cartilage repair technologies using advanced 3D printing and nanomaterial polymers. Orthomod LLC - David Kirschman, MD, CEO Orthomod is developing regenerative orthopedic implants to improve patient outcomes using novel structural biomaterials. ALLUMIN8 - Alyssa Huffman, CEO ALLUMIN8 is Introducing a new category of Therapeutic Orthopedic & Spine 3D Hardware designed to reduce global reoperation rates. Register today! https://lnkd.in/guVCJgMd #venturecapital #seriesA #fundraising #orthopedics #orthopedicsurgery #orthopedicimplants #medtech #spinesurgery Drue DeAngelis TJ Halvorson
-
-
Nanochon reposted this
📢 Listen up squad 📢 Nanochon recently had the honor of being hosted by the Wallace H. Coulter Center for Translational Research Biomedical Frontiers Podcast! Thanks so much Dasha Tyshlek for the great interview and for helping us spread the word about the work we're doing in cartilage regeneration! #Orthopedics #Sportsmedicine #advancingorthopedics
Fractional Chief Revenue & Growth Officer and Consultant | 🎙Host of Biomedical Frontiers Podcast
New episode of the Biomedical Frontiers Podcast is out now! Benjamin Holmes, Ph.D. shares insights on the biology of cartilage and the field of biomaterials and regenerative medicine. In this episode you will learn: (1) Why Ben conducted over 100 interviews with doctors to understand his target market (2) Why current standards of care for knee cartilage fall short in delivering healing and recovery (3) The future of the field of regenerative medicine and joint health (4) The value of programs like the National Science Foundation (NSF) iCorps and MedTech Innovator Incubator programs in advancing from concept to product to healthcare impact. This episode is a must listen for anyone in #biomaterials and #materialsengineering, anyone who has had a knee replacement or has a family history of #arthritis or #osteoporosis and all those practicing #sportsmedicine and #orthopedics. Nanochon is also recently the winner of Cville BioHub's BioSpark competition. Listen: https://lnkd.in/e4cSwbvU
-
-
📢 Listen up squad 📢 Nanochon recently had the honor of being hosted by the Wallace H. Coulter Center for Translational Research Biomedical Frontiers Podcast! Thanks so much Dasha Tyshlek for the great interview and for helping us spread the word about the work we're doing in cartilage regeneration! #Orthopedics #Sportsmedicine #advancingorthopedics
Fractional Chief Revenue & Growth Officer and Consultant | 🎙Host of Biomedical Frontiers Podcast
New episode of the Biomedical Frontiers Podcast is out now! Benjamin Holmes, Ph.D. shares insights on the biology of cartilage and the field of biomaterials and regenerative medicine. In this episode you will learn: (1) Why Ben conducted over 100 interviews with doctors to understand his target market (2) Why current standards of care for knee cartilage fall short in delivering healing and recovery (3) The future of the field of regenerative medicine and joint health (4) The value of programs like the National Science Foundation (NSF) iCorps and MedTech Innovator Incubator programs in advancing from concept to product to healthcare impact. This episode is a must listen for anyone in #biomaterials and #materialsengineering, anyone who has had a knee replacement or has a family history of #arthritis or #osteoporosis and all those practicing #sportsmedicine and #orthopedics. Nanochon is also recently the winner of Cville BioHub's BioSpark competition. Listen: https://lnkd.in/e4cSwbvU
-
-
Meet our investigator! Dr. Mike O'Malley will be leading our first in human trial at Carilion Clinic Dr. O'Malley has extensive experience in sports medicine, both at this own clinical practice at VT-Carilion and as the USA Hockey National Team Development Program's team physician. He has an acute interest in joint preservation, cartilage repair and in advancing minimally invasive arthroscopic surgical techniques for knee injuries. He has been involved in numerous journal and textbook publications focused on orthopedic surgery and sports medicine, and is a member of the American Academy of Orthopaedic Surgeons (AAOS), the Arthroscopy Association of North America (AANA), the American Orthopaedic Society for Sports Medicine (AOSSM), the American Orthopaedic Association (AOA) Emerging Leaders Program, and the Virginia Orthopaedic Society (VOS). We can't wait to kick off our first in human study soon! #orthopedics #sportsmedicine #advancingorthopedics https://lnkd.in/ga4Ai6yg
Michael P. O'Malley M.D. | Carilion Clinic
carilionclinic.org
-
Where would we be without our fantastic investors and partners?! Thanks so much to Alumni Ventures for their support and mentorship!! #orthopedics #orthopedicdevices #advancingorthopedics https://lnkd.in/ddSY6y5R
Follow our clinical and commercial journey with our quarterly updates! Nanochon is about to initiate our first in human study and invites all of our followers to stay up to date as we keep momentum going. #OrthopedicCare #AdvancingOrthopedics #SportsTech #BioTech
Nanochon 3rd Quarter Updates
Nanochon on LinkedIn
-
Back in Cville! CEO Benjamin Holmes pitched at the CvilleBioHub #BioSparkVA event in Charlottesville a few weeks ago - alma mater to both Ben and CSO Rachel Offenburg. The event's goal was to allow innovative startups the opportunity to pitch local investors and network with members of the biotech community. Nanochon has benefited greatly from the BioHub's guidance and contributions to the company's development, and we're so grateful to have access to such a fantastic resource! #OrthopedicCare #AdvancingOrthopedics #SportsTech #BioTech
-
Nanochon reposted this
Join us on December 4th at 2pm PST to hear from three more innovators in the MSK industry. Benjamin Holmes, CEO at Nanochon, will present. Nanochon is a medical device company focused on developing innovative cartilage repair technologies using advanced 3D printing and nanomaterial polymers. Their flagship product, the Chondrograft™, is designed to provide both immediate structural support and promote natural tissue regeneration for joint repair. Nanochon aims to revolutionize orthopedic care by offering less invasive, more durable alternatives to traditional joint replacement surgeries, improving recovery outcomes for patients, and addressing the cost and difficulty of the standards of care for sports medicine surgeons. Register today! https://lnkd.in/g_cFYDBU #fundraising #medtech #orthopedics #jointsurgery #jointrepair #jointreplacement #orthopedicsurgery cultivate(MD)
-
-
Nanochon reposted this
Hey everyone! We're excited to let you know that we will be featured on the BoneChat webinar speaker Thursday, November 14, 2024, at 3 P.M. (EST). Benjamin Holmes will join Tiger Buford for a discussion about the importance and mechanical performance, stability and usability of new tissue scaffold devices. We will also talk about how our device, Chondrograft, regenerates cartilage using 3-D printing and our cutting-edge nanomaterials. Click below to join us for the event! #OrthopedicCare #AdvancingOrthopedics #SportsTech #BioTech https://lnkd.in/gDaM2wCq
A weekly invitation to Tiger's ortho connections, technologies, and strategies you need to upgrade your business and career.
us06web.zoom.us