🎁 We would like to wish happy holidays to all our customers, partners and team members as the year 2024 comes to an end. We are already looking forward to the new opportunities that 2025 will bring! 🍀 Here is a beautiful scenery 🖼️ from Hollola, where Amitronic is located:
Amitronic Oy
Appliances, Electrical, and Electronics Manufacturing
Hollola, Southern Finland 161 followers
We offer products for electronics production and protection as well as for EMC and environmental testing.
About us
We are an import company that sells and markets technical equipment, components and materials for electronics as well as for EMC and environmental testing. We are a part of the international Addtech Group.
- Sivusto
-
http://www.amitronic.fi/
External link for Amitronic Oy
- Toimiala
- Appliances, Electrical, and Electronics Manufacturing
- Yrityksen koko
- 2-10 employees
- Päätoimipaikka
- Hollola, Southern Finland
- Tyyppi
- Privately Held
- Perustettu
- 1993
Sijainnit
-
Ensisijainen
Get directions
Tarmontie 2
Hollola, Southern Finland 15860, FI
Työntekijät Amitronic Oy
Päivitykset
-
Wavecontrol introduces MonitEM-IoT, an innovative solution to perform human exposure assessment for smart environments! The electromagnetic field (EMF) area monitor ensures the safety and well-being of individuals in the increasingly digital world. 🌍 Here are the key features of MonitEM-IoT: 🛜 Accurately monitors EMF from low frequencies up to 8 GHz 🖥️ IoT connectivity for advanced analytics and real-time visualization 🔋 Easy installation, no maintenance, long lasting batteries 🛡️ Robust and durable Contact us for more! 😊
-
-
🏷️ Thermaltronics TMT-9000S soldering stations now have a 𝘀𝗽𝗲𝗰𝗶𝗮𝗹 𝟮𝟬% 𝗱𝗶𝘀𝗰𝗼𝘂𝗻𝘁 𝘂𝗻𝘁𝗶𝗹 𝘁𝗵𝗲 𝗲𝗻𝗱 𝗼𝗳 𝗙𝗲𝗯𝗿𝘂𝗮𝗿𝘆 𝟮𝟬𝟮𝟱! TMT-9000S soldering stations are based on Curie Heat technology. This unique technology allows faster heat transfer🔥 from the soldering tip to the solder, improving soldering speed and solder joint quality. Thermaltronics TMT-9000S soldering stations are easy and simple to use and do not require heating calibration. Visit our website to learn about the advantages of the TMT-9000S soldering station, or contact our sales.
-
-
⏫ If you would like to upgrade your EMC chamber with new absorbers but keep the old, glued ferrite tiles, check out this solution from Comtest Engineering. Contact us for more information!
Can you upgrade an EMC chamber and keep the old, glued ferrite tiles? “It’s possible”, says Uliana Trucchi, one of our technical consultants. “Say you want to replace your old absorbers because you need to meet performances over 1GHz, and you wish to keep the ferrite tiles because they are glued to the chamber’s walls and ceiling. That is exactly what the people from Nemko in Germany asked us for the chamber upgrade in the photo.” Uliana was in charge of upgrading this room, which is ready to go into operation as we speak. Uliana: “Ferrite tiles are made from ceramic materials used since the late 60s to absorb magnetic waves. They come in different thicknesses from different suppliers, which makes it difficult for us to work with because the impedance between the ferrite tiles and the absorbers we use for EMC chambers must match when working between 80-240 MHz. Our R&D specialists, Dimitrios Barakos and Dmitriy Penkin, made the necessary calculations for this project to see if we could match our new absorbers with the existing tiles, and they came up with a solution.” Nicola Baus, responsible for marketing at Nemko, recalls a challenging process. Nicola: “Keeping the existing tiles was a huge relief for us. It saves costs and extra downtime for the chamber, which is just as valuable. The working conditions were not ideal for the Comtest installation team due to the lack of storage space, but we finally solved this by working with containers outside our building. Despite these challenges, they delivered the upgraded chamber in time for us to resume testing.” We advise companies that rent their buildings to use dismountable tiles instead of glued, non-removable tiles. Contact Uliana Trucchi for more information on both options.
-
-
Recently, SIQ's EMC test engineers successfully performed a Field Uniformity validation test that confirms that this chamber by Comtest Engineering can also be used for compliant radiated immunity tests according to IEC/EN61000-4-3. A test house like SIQ can benefit from using this chamber for commercial product testing in addition to automotive components. This increases their capacity and flexibility to serve their customers, resulting in a better customer experience.
What are the design criteria for CISPR25 towards absorber lining as per the latest standard version? CISPR 25 was initially published in 1995. The 5th edition, published in 2021, significantly expanded the category of receivers by including new technologies such as Wi-Fi, V2X, navigation, and more. The standard has extended to upper frequencies from 2.5 to 5.925 GHz to keep up with technological advancements and improve overall quality. Another critical change in edition 5 is section 4.3.4, which states that the performance of the absorption material shall be greater than or equal to 6dB from 70MHz to 5,925GHz. This is a significant change compared to edition 4, where the upper frequency was 2.5GHz. Partial absorber lining. Why is this important? Many automotive component test chambers are built with a so-called partial absorber lining, which means all walls and ceilings are covered with ferrite tiles. Still, roughly half of these surfaces are also covered with hybrid absorbers. The absorbers are typically installed around the test table in a ‘horse-shoe’ layout on the walls and ceiling. Moving the 6dB reflectivity requirement from 2.5 to 5,925 GHz means that surfaces covered with ferrite tiles only, the other half of the chamber, no longer comply with this section of CISPR25 ed.5. Testing and upgrading. If you already have a chamber, we can upgrade it by installing hybrid absorbers to completely cover the walls and ceiling. Additionally, if you need to have your chamber (ALSE) validated according to Annex I (long wire test method), we can perform that test for you. Comtest Engineering has the necessary equipment and skilled test engineers to conduct the test and demonstrate compliance. One example of this proactive approach was with our client, Marjan Mak, from SIQ Ljubljana in Slovenia – the leading EMC laboratory in the region. “When we purchased a new chamber from Comtest last year, they informed me about the new CISPR25 requirements and offered an alternative design that met all the new requirements. As a top-compliant EMC service provider, we must be fully compliant ourselves. Meanwhile, the Comtest team upgraded our existing chamber to make it future-proof and 100% compliant.” If you're a professional who is unsure about the adequacy of your materials, we're happy to offer a quick consultation and provide you with the necessary CISPR25 validation test through one of our technical consultants: Marc Le Roy, Vincent van de Vrie, Hanneke Mertens - van Veen, or Uliana Trucchi.
-
-
We are happy to introduce the new AMETEK CTS Teseq CBA 8G series amplifier product family! ⚡ High power output to support most demanding EMC applications in defense, automotive and telecommunications industries ၊၊||၊ Frequency extension from 6 GHz to 8 GHz 📈 High linearity, minimal signal distortion Contact our sales for details!
-
-
🎨 Esittelyssä Pontiksen uudet EMC-kamerat eri käyttötarkoituksiin! 📷 Pontiksen EMC-suojatut kamerat ovat loistava valinta EMC-testiympäristöihin. Uuden koteloinnin ansiosta kamerat ovat kompakteja ja monikäyttöisiä. Kameroissa on eri mallivaihtoehtoja tehokkaisiin HD-kameroihin, lämpötilan sietoon, valokuituliitäntöihin, ajoneuvokäyttöön, monenlaisiin kiinnitysvaihtoehtoihin, kauko-ohjaukseen sekä paljon muita optioita. Edistyksellisten mallien lisäksi Pontikselta löytyy myös edulliset EMC-kameravaihtoehdot. ⬇️ Lisätietoja kotisivuiltamme. --- 🎨 Discover new Pontis EMC-cameras for a variety of needs! 📷 Pontis EMC hardened cameras are great for EMC test facilities. Thanks to the new housing design, they are compact and versatile. Different models come with high performance HD surveillance, temperature resistance, fiber optic interface, use in vehicles, a number of mounting options, remote control and more. In addition to the advanced solutions, Pontis provides affordable cameras for simple needs. ⬇️ Details on our website: https://lnkd.in/gkGdeuhC
-
🔍 Johtava EMC testilaitteiden valmistaja Ametek CTS on julkaissut uuden technical note:n johtuvien siedon IEC 61000-4-6:2023 standardin viimeisimmästä 5-versioista. 📰 Dokumentti esittelee oleellisimmat muutokset mitä standardin 5-versio on tuonut verrattuna edelliseen versioon. IEC 61000-4-6:2023 standardi määrittelee EMC johtuvien siedon testaukset, mitkä johtuvat laitteistoon kaapeleita pitkin. Johtuvien siedon testaukset ovat kriittisiä EMC-testauksessa. 🔻 Käy kotisivuillamme ja tutustu uuteen technical noteen, sekä Ametek CTS:n alla olevasta linkistä. --- 🔍 Ametek CTS, a trusted leader in the EMC test equipment field, has introduced a new technical note focusing on the recent updates in the 5th edition of the international standard IEC 61000-4-6:2023. 📰 The document emphasizes significant changes between editions 4 and 5 of the standard. The updated version outlines testing procedures to protect devices from disruptions caused by nearby radiofrequency fields, which occur when cables act as unintended antennas. These disturbances are critical considerations in electromagnetic compatibility (EMC) testing. 🔻 Visit our website for the technical note and more about Ametek CTS through the link below. https://lnkd.in/dGNnnvqh
IEC 61000-4-6 ED 5 EDITION 5 – Standardi muutokset - Amitronic
amitronic.fi
-
📍Amitronic team is on site at Alihankinta accompanied by the silicone expert Ian Taylor from CHT Group. ☕️ Find us at booth C126 and let's have a cup of coffee! #alihankinta #alihankinta2024
-