Você está executando um laboratório. Como você pode garantir a segurança de sua equipe e equipamentos?

Conduct thorough risk assessments to identify potential hazards in the lab environment, including chemical, biological, radiological, and physical hazards. Document and prioritize these hazards to implement appropriate control measures.

HIRADC Hazard identification, risk assessment and determining controls. Every job step even material transfer within the lab should be listed in the list. Worse case scenario should be predicted if no available data. Let's say, trip and fall might happen during the material transfer. What is the probability,severity and detection if it happens. If the RPN is high, is there existing control and is additional control needed? Refer to safety control like elimination, substitution, engineering, admin or PPE control. The control need to be communicated and implemented to all doing the job step.

To ensure safety in a laboratory setting, it's essential to provide thorough safety training, enforce the use of personal protective equipment, maintain equipment regularly, handle hazardous materials with strict protocols, prepare for emergencies, monitor environmental conditions, stay compliant with regulations, and foster a culture of safety. These measures collectively work to safeguard both staff and equipment, promoting a secure and productive laboratory environment.

By implementing comprehensive safety protocols, conducting regular training sessions, providing personal protective equipment (PPE), maintaining well-maintained equipment, performing frequent safety inspections, and fostering a culture of safety awareness among staff.

I would suggest the following: 1. Appointment of a safety management team to establish your lab's safety policies according to the relevant national, regional and international standards i.e. ISO 15190, ISO 35001 2. Compile a safety manual for your lab. This document will describe the implementation of safety requirements in your lab's setup. This manual should also specify who identifies, reports, investigates and closes safety gaps. 3. Conduct periodic safety audits at least twice a year to evaluate suitability and effectiveness of your safety management system. 4. Regularly review safety status during lab meetings and at the annual management review

For all lab technicians, it is crucial to conduct assesments of potential risks, especially in a wet lab setting. Risks include but are not limited to chemical, biological, physical, and electrical hazards. After identifiying, record the observed potential hazards and make the documentation available to all lab members.

Identifying the hazards ahead of time allows you to set up the environment with preventative equipment and control process as well as knowing how to resolve the issue when something does happen.

É fundamental o uso de materiais de proteção individual conforme mencionado no artigo. Garantir a segurança individual e coletiva é prioridade em um ambiente de laboratório.

In my experience, it has helped to add reminders to my calendar for weekly disposal of hazardous waste collected in the lab. This will ensure waste is being collected on a routine basis and prepared for any and all EPA inspections.

The second important step in ensuring laboratory safety is thorough staff training. Provide your team with comprehensive knowledge of safe practices and procedures designed for your lab. Provide clear instructions for the handling, storage, and disposal of hazardous materials, as well as the use and maintenance of equipment. Training should extend to emergency management, incident reporting, and compliance with rules and regulations. It encourages a culture of strict adherence to laboratory governance and is of utmost importance in ensuring staff competence and competence.

Provide staff members education and knowledge concerning the importance of laboratory safety and provide good work flow to ensure lab safety.

Provide comprehensive safety training for all lab personnel, including proper handling of hazardous materials, emergency procedures, use of personal protective equipment (PPE), and adherence to safety protocols. Regularly reinforce safety practices through ongoing training and awareness programs.

In addition to the mentioned training areas, there is need to do more trainings on the type of personal protective equipment to use and when to use it , a glove is not just a glove and a helmet is not just a helmet .

Train your staff on GLP; *always wear your personal. protective equipment(PPE) *participate in refresher training and safety exercises *Be aware of what you are doing all the time *pay attention to unfamiliar smell and substance.

Training is the utmost important step. You can have a really good knowledge of the matter/ subject but each one of the workers needs hands-on training. This can be combined with SOPs and instructions to further confirm competence and reduce incidents

Train your stuff and come up with a pact as a team get everyone on board. Management must be involved so as to motivate other colleagues

I've found it really beneficial to dive into real-life situations where things went awry in labs due to insufficient training. By examining each case, we can pinpoint the exact shortcomings in training that contributed to these incidents. It adds a practical touch, offering insights into the consequences of not having thorough safety education. Additionally, shining a spotlight on the crucial role supervisors and mentors play in reinforcing safety protocols and cultivating a culture of safety awareness within the lab is something we shouldn't overlook. Their influence can make a significant difference in how well the team adheres to safety measures.

The second important thing is to provide adequate training to your stuff.  Offer thorough training programs for all laboratory personnel, covering topics such as proper handling of hazardous materials, equipment operation and maintenance, emergency procedures, and personal protective equipment (PPE) usage

Approach employees with a positive attitude. Employees do not make mistakes on purpose so punishment does nothing but shame people into not asking for help. Value experienced employees and foster an environment of teamwork.

Equip the lab with necessary safety equipment and controls, including eyewash stations, emergency showers, fire extinguishers, spill containment kits, fume hoods, and safety cabinets for hazardous materials storage. Ensure that safety equipment is properly maintained, accessible, and functional at all times.

Protective equipment is very important step in conducting a safe lab environment. Each lab must have protective personnel equipment, such as goggles, gloves, masks, coats and head cover as well as lab safety equipment fume hoods, fire extinguish, good ventilation system, suitable fire system with alarm biohazard safety cabinets eyewash and shower and first aid kits for emergencies.

Having essential equipment is important. Your staff may be well trained and knows how to respond to the event, but with our safety equipment, they will not be able to do anything about it.

Equipping your lab with the necessary safety features is the third step necessary to ensure your safety. This includes personal protective equipment (PPE) such as gloves, goggles, masks, clothing and footwear, as well as industrial accessories such as fume hoods, biosafety cabinets, ventilation systems, fire extinguishers and alarms provision of types It is important to ensure at all times that safety equipment is adequate, available, accessible and in good working order. It is equally important to train you and your employees on the proper use of these devices to maximize their protection against potential hazards.

1. Encourage the use of equipment as recommended to prevent accidents and limit strain. 2. Provide and require personal protective equipment (PPE) such as goggles, face shields, safety glasses, gloves, and foot protection based on the specific risks in the work environment.

You should also have in place and know how to apply and use first Aid box kits for emergency use by some staff member/s in each shift to attend to injuries or any other alarming medical care as a temporary measure before a proper medical measure is applied.

Foster a culture of safety where all staff members prioritize safety in their daily activities. Encourage open communication about safety concerns, near misses, and incidents, and empower employees to take proactive measures to prevent accidents.

You need to monitor that the personnel are adhering to the safety mitigation strategies which are in place and have been trained on.

All of our employees are provided with full PPE equipment that covers all types of exposure that they are subject to. All ventilations systems, fume hoods, fire extinguishers, etc, are routinely inspected to make sure everything is up to standard.

Take the time to ensure that your staff knows what to do and where to go if the fire alarm sounds (fire drills can be difficult to schedule, especially when there is lab work happening at all hours of the day, but need to be prioritized if safety is to be prioritized). Staff should also be shown the location of fire extinguishers, safety showers, eye wash stations, etc. The importance of CPR/AED training should also be highlighted and all employees must be made aware of the location of AEDs so, should the occasion arise, they can respond efficiently. These trainings should be made accessible (ideally company covers cost) and staff should be encouraged to participate.

Conduct regular inspections and safety audits of the lab environment to identify potential hazards, assess compliance with safety regulations, and address any deficiencies promptly. Establish a schedule for equipment maintenance, calibration, and safety checks to ensure optimal performance and reliability.

Regular and thorough laboratory testing is the fourth most important safety measure. Inspect your lab to identify and correct potential safety hazards or errors. Monitor equipment condition and operation, storage and labeling, workplace cleanliness, and compliance with safety procedures. Additionally, conduct audits and analyzes to evaluate the effectiveness of your security measures, identify areas for improvement and ensure continuous improvement of security measures.

Clearly label hazardous materials and equipment, and provide detailed safety data sheets (SDS) outlining potential hazards, handling instructions, and emergency procedures. Ensure that staff members understand how to access and interpret this information.

Regular inspections and safety drills should be conducted. Daily, weekly and monthly checklists on equipment status, labeling, documentation (ie, SDS), first aid kits, etc, should be maintained. A yearly (maximum) audit by the health and safety responsible should be conducted and any non-conformity should be dealt with as fast as possible.

To maintain overall quality assurance, regular inspections have to be carried out. There should be written SOPs and policies in place in every workspace, detailing daily to monthly maintenance actions to be carried out and every staff should be conversant and compliant with it. This will help in maintaining not only a clean and hygienic space but also a safe space always. And if there are lapses, they should be reported and handled with the utmost urgency.

After practicing the safety and health guidelines in your laboratory, the second important thing is to ensure the effectiveness of the actions. This should be covered by regular inspection; be it scheduled and non-scheduled to avoid procrastination.

Continuously monitor safety performance in the laboratory, including conducting regular safety inspections, incident investigations, and safety audits. Use feedback from staff members to identify areas for improvement and implement corrective actions as needed.

Communication is the fifth most important step in ensuring lab safety. Establish and enforce clear and consistent safety rules and standards while promoting a positive and supportive safety culture. Provide feedback and recognize employee safety performance. Encourage open discussion of safety issues and create an environment where concerns can be addressed. Encourage learning from experiences and the sharing of best practices between you, your staff and stakeholders, and contribute to an overall improved safety environment.

Foster a culture of safety by promoting open communication and collaboration among lab personnel. Encourage reporting of safety concerns, near misses, and incidents to facilitate continuous improvement and proactive hazard mitigation. Clearly communicate safety policies, procedures, and expectations to all lab members, and actively involve them in safety initiatives and decision-making processes.

Let your staff speak their minds as well to get their level/ knowledge regarding their job, so you may determine what areas to improve.

On a daily basis you should instruct and advise your workers on correct handling of materials and equipment, use of PPEs and CPEs and attention to the procedures. An yearly report with non-compliant procedures and their proposed solutions should be presented to the stakeholders. The safety culture must permeate and go hand-to-hand with the regular work culture. Always have your door open for your staff so they can communicate their safety concerns.

There should be a culture of safety in the laboratory that actively involves the staff. Communication and feedback should be easy so that the staff feel a sense of belonging and ownership of maintaining safety in the laboratory.

The findings from safety risk assessment should be disclose to all member of laboratory to ensure the awareness. There should be review of policy or any other findings, and also to update a new safety and health information.

El primer año de mí ciclo formativo una compañera se le cayó acido por la mano en una práctica. No pasó nada más que ir al médico y una crema para quemaduras, pero esto nos dice que somos humanos. Por eso, saber y aprende sobre seguridad en el laboratorio es fundamental para entrar a él. Porque, nunca pasa nada, hasta el día que pasa. Así que fórmate, aprende de todo lo que te guste, pero no olvides la seguridad.

Something else that I find very useful is frequent safety walks in the lab with an inspection checklist to confirm that all the set safety measures are in place, to the minimum the team should inspect on the below areas. -Laboratory general environment :Ventilation, clear pathways, waste disposal, exits and lighting. -Emergency equipment and labels: Fire extinguishers, smoke detectors, sand buckets, eye washers etc -Personal protective equipment: Available and in good state -Electrical hazards: Flexible cords, cover plates, multiplug overloads, cover guards etc -Storage : Condition of shelves and cabinets, planning based on weight, corrosiveness, combustion etc - Chemical hoods and lab ventilation -Security : access doors, alarms, locks etc

7. Security Measures: Implement measures to prevent unauthorized access to lab areas and protect valuable equipment and materials. This may include security cameras, access controls, and data handling protocols. 8. Mental Health Support: Prioritize staff mental health by offering resources for stress management, work-life balance, and mental health support. Foster an open and supportive environment for seeking help when needed.

Agregar, Simbologia y categorías de materiales peligrosos. Usos adecuados equipo de seguridad indicado para el manejo de estos y los diferentes procedimientos. Residuos tóxicos Residuos Explosivos Residuos volátiles Material caliente 🔥 Añadir capacitaciones al personal del área bajo seguridad en sus procesos.

I agree with all the steps and in addition monthly meeting for lab to update each other on safety and also training some of awareness for the months. Each team in team being tasked with responsibility to look after some of the room in the laboratory to ensure safety with housekeeping.