Fish Yu’s Post

The material conveying of the shaftless screw conveyor relies on the sliding movement of the rotating blades, and the conveying direction determines the left and right rotation direction of the screw blades and their rotation direction. Therefore, it can be conveyed unidirectionally or bidirectionally as needed, and can also be loaded at multiple points. It can be installed horizontally or at an inclined angle. The material enters the spiral body from the feeding port, and is transported from the discharge port or into the press machine for pressing and dehydration through the rotation of the spiral. ==================== TNW Co., Ltd. email: info@tnwcn.com web: https://www.tnwcn.com ==================== #screwconveyor #screwpress #DAF #wastewatertreatment #sewagedisposal #sludgedewatering #sludgetreatment #watertreatment #wastewater #sewage #sludge #wwtp #stp #tnw #tnwcoltd

IFAN PP Compression Fitting is a commonly used pipe joint, mainly used to connect the pipe interface between different pipes. Made of high-quality PP material, it has excellent performances such as corrosion resistance, heat resistance, pressure resistance, shock resistance, waterproof, and leak resistance. 

We are often asked what information we need to either help design a new seal or reverse engineer a solution from an existing application... Simple. We need your STAMP! SPEED - What is the speed that the seal will be required to perform? This speed can be represented either as RPM (Rotations Per Minute), FPM (Feet Per Minute), or MPS (Meters Per Second). TEMPERATURE - What are the minimum and maximum temperatures the seal will be exposed to? APPLICATION - Where is the seal being used? What is its function? This can refer to the equipment in which the seal is being installed as well as what the function is of the seal is. MEDIUM - This refers to the lubricant or material that is to be sealed or excluded. Are there compatibility issues? Common examples of media are grease, oil, hydraulic fluid, water, etc... PRESSURE - What are the minimum and maximum pressures the seal will be exposed to? The two most commonly used units are either PSI (Pounds per square inch) or BARS. Our technical team are happy to advise on any sealing issues you may have so please get in touch. #hightemperature #highpressure #highspeed #sealingsolutions #seals #ptfe #fpm #polyurethane #nbr #peek #norsok #api #madeinbritain #

The best solution for seawater, industrial applications

Thanks Todd Grafenauer for the article. The trend towards larger pressure pipes is certainly continuing. What can also be recognised are PE pressure pipe applications with operating pressures in addition to 16 bar/ 232 psi, for example SDR 7.4 and 25 bar/ 362psi operating pressure. In my opinion, it is also a must to use fittings that can withstand full pressure for economic reasons. Here is my report on the history of PE large-diameter pipes. https://lnkd.in/ewnpAF3F

The core components of a screw press are a set of spiral press rollers that rotate to squeeze materials and achieve solid-liquid separation. The material is first fed into the feed inlet of the filter press, and then moved forward along the axis of the screw press under the push of the screw. During the movement, the squeezing effect of the spiral gradually increases, and the moisture in the material is gradually squeezed out, forming a filtrate that is discharged, while the solid is compressed into a filter cake and discharged. If you have any questions, please contact us through the email below. ==================== TNW Co., Ltd. email: info@tnwcn.com web: https://www.tnwcn.com ==================== #screwpress #DAF #wastewatertreatment #sewagedisposal #sludgedewatering #sludgetreatment #watertreatment #wastewater #sewage #sludge #wwtp #stp #tnw #tnwcoltd

"Expansion joints are flexible connectors used in piping systems of nearly all industries. They allow for movement within a piping system that occurs due to changes in temperature or pressure... Using the wrong expansion joint in a piping system can reduce the life of the joint and have potentially disastrous consequences if the joint fails." Head over to the blog to read some common pitfalls to watch out for when selecting expansion joints for FRP systems: https://lnkd.in/gG4jEPyu #ProcoProducts #BlogPost #FRP #ExpansionJoints

The newly installed mechanical seal of the slurry pump is leaking If the mechanical seal of the slurry pump is used for a long time, water leakage will occur. This is caused by wear and tear. But what happens if the newly installed mechanical seal leaks? This is probably caused by two reasons. Let's check whether the pressure of our shaft seal water is too high. If the pressure of the shaft seal water is too high, it will also cause water leakage. Because the pressure is too great, it displaces the gasket in the machine seal. If the gasket no longer seals, it will cause water leakage. Another situation is that when starting the machine, the shaft seal water valve is not opened in time. We should note here that our shaft seal water needs to be opened before starting the pump. Correspondingly, when shutting down the pump, you should first stop the pump and then close the shaft sealing water valve. Tel/whatspp+8618033775897 Tel/whatsapp+8618033775897 email: evieyang@panstopump.com web:https://panstopump.com/  #slurrypump #heavydutypump #miningpump #pulppump #miningcoal #slurrypumping

Are you handling your TC bolts the right way? Here’s what to keep in mind to ensure your TC bolts remain reliable and ready for use. Proper storage and handling can make all the difference in their longevity and performance: • Control Humidity: Store in a cool, dry area to prevent corrosion. Moisture can weaken the bolts over time, so consider using dehumidifiers if needed. • Organize by Size and Grade: Arrange bolts by size and grade for quick access. This prevents mix-ups, helping ensure the right bolt is used for each application. • Inspection Before Use: Check each bolt for signs of wear, corrosion, or damage before installation. Catching issues early prevents potential failures and maintains structural integrity. Adhering to these guidelines ensures that your TC bolts remain durable and dependable. Proper storage and handling are crucial to preserve their quality and effectiveness. For further information or assistance, please contact LRKD Industries 📧 info@LRKDindustries.com 📞 (646) 880-6778 🌐 Learn more at www.lrkdindustries.com Follow us on: Pinterest : LRKD Industries X : LRKD Industries Facebook : LRKD Industries #metalfasteners #TensionControlBolts #TCBoltsStorageAndProperHandling #HeavyDutyBolts #IndustrialFasteners #SteelBolts #ConstructionHardware #StructuralFasteners #TCBoltsControlHumidity #TCBoltsOrganize #TCBoltsInspection #BuildingMaterialsSupplier #HighStrengthBolts #BoltInstallation #MetalFasteners

𝗧𝗶𝗽𝘀 𝗳𝗼𝗿 𝗺𝗮𝘁𝗰𝗵𝗶𝗻𝗴 𝘁𝗵𝗲 𝗽𝗶𝗽𝗲 𝗱𝗶𝗮𝗺𝗲𝘁𝗲𝗿 𝗳𝗼𝗿 𝘁𝗵𝗲 𝘄𝗮𝘁𝗲𝗿 𝗽𝘂𝗺𝗽s: 🛠️ Hose connection method: It is recommended that 𝘁𝗵𝗲 𝗶𝗻𝗻𝗲𝗿 𝗱𝗶𝗮𝗺𝗲𝘁𝗲𝗿 𝗼𝗳 𝘁𝗵𝗲 𝗵𝗼𝘀𝗲 𝗶𝘀 𝟮-𝟯𝗺𝗺 𝘀𝗺𝗮𝗹𝗹𝗲𝗿 𝘁𝗵𝗮𝗻 𝘁𝗵𝗲 𝗺𝗮𝘅𝗶𝗺𝘂𝗺 𝗼𝘂𝘁𝗲𝗿 𝗱𝗶𝗮𝗺𝗲𝘁𝗲𝗿 𝗼𝗳 𝘁𝗵𝗲 𝗶𝗻𝗹𝗲𝘁 𝗮𝗻𝗱 𝗼𝘂𝘁𝗹𝗲𝘁 𝘁𝗼𝘄𝗲𝗿. (The inner diameter of the front pipe of the threaded interface is the same) 🔄 The pipe should be 𝗮𝘀 𝘀𝗵𝗼𝗿𝘁 𝗮𝘀 𝗽𝗼𝘀𝘀𝗶𝗯𝗹𝗲 and have as few bends as possible to minimize pipe resistance. 📈 It is best 𝗻𝗼𝘁 𝘁𝗼 𝗹𝗲𝘀𝘀 𝘁𝗵𝗮𝗻 𝟵𝟬 𝗱𝗲𝗴𝗿𝗲𝗲𝘀 𝗶𝗻 𝘁𝗵𝗲 𝗽𝗶𝗽𝗲 𝗯𝗲𝗻𝗱, and make the turn as smooth as possible to minimize pipe resistance. 💧 𝗨𝘀𝗲 𝗰𝗼𝗿𝗿𝗼𝘀𝗶𝗼𝗻-𝗿𝗲𝘀𝗶𝘀𝘁𝗮𝗻𝘁 𝗽𝗹𝗮𝘀𝘁𝗶𝗰 𝗵𝗼𝘀𝗲𝘀 to withstand the pressure generated during pump operation. ⚠️ For water pumps above 40L, try to 𝘂𝘀𝗲 𝗽𝗶𝗽𝗲𝘀 𝘄𝗶𝘁𝗵 𝗶𝗻𝘁𝗲𝗿𝗻𝗮𝗹 𝘀𝗽𝗿𝗶𝗻𝗴 𝘀𝘂𝗽𝗽𝗼𝗿𝘁 (as shown in Pic.1) to avoid excessive suction causing pipe deformation (as shown in Pic. 2) and insufficient water inflow. #micropumps #pipe diameter #hose connection #pipe bend #pump installation