As a dual-band/dual-polarization solution with excellent XPD performance, the all-new CommScope ValuLine® Antenna replaces as many as four standard microwave antennas to boost capacity while lowering total cost of ownership. 📺 https://ow.ly/KM6z50Uv0LK
TESSCO Technologies’ Post
More Relevant Posts
-
OZC Plug in Modules featured on cover of Microwave Product Digest The JXM series plugin modules for J-Chassis platforms extend RF and microwave over fiber transport into the Ku, K, Ka, Q, and V bands. They can have lower frequency roll-off as low as 20 kHz, and the JXM series of receivers offer a spurious-free dynamic range for a typical link of 108 dB/Hz. Noise figure, input 1 dB compression, and input third-order intercept performance can be optimized for various optical loss budgets. https://lnkd.in/gP2cwC3r
To view or add a comment, sign in
-
SV Microwave's QuarterBack® RF cable assemblies utilize a quarter-turn bayonet style coupling nut with a locking feature for standard SMP and SMPM interfaces in standard female and male bulkhead interfaces. • Ideal for high vibration and test applications that require a large number of mating cycles • Spring loaded positive mating feature allows excellent electrical performance in extreme vibration environments • Low VSWR through 40 GHz (SMP) / 65 GHz (SMPM) https://lnkd.in/eHdwm9db
To view or add a comment, sign in
-
SV Microwave's threaded SMPM connectors feature the standard SMPM RF interface with a threaded coupling nut to ensure low mating and de-mating force. Threaded SMPM's are ideal for high vibe environments. https://lnkd.in/gTxJytSG
To view or add a comment, sign in
-
𝐂𝐎𝐌𝐏 (Coordinated Multi-Point transmission/reception) : The 𝐂𝐎𝐌𝐏 concept is to improve Radio Conditions for the UEs located at cell edges or in poor coverage areas by using multiple eNB to serve UE. ▪️UL CoMP Feature improve UL throughput. ▪️UL CoMP uses the antennas of two neighboring cells to receive UE signals from PUSCH & Combines Rx signals. ▪️it provides signal combining & interference mitigation gains. ▪️We can trigger ULComp based on A3 event. 𝐂𝐨𝐧𝐜𝐥𝐮𝐬𝐢𝐨𝐧: 📍 UL Average Throughput Enhanced 📍 UL Interference Improved.
To view or add a comment, sign in
-
The HLM-100001PSM from Marki Microwave is a GaAs Schottky Diode Signal Limiter that operates in the X-band from DC to 10 GHz. It can handle a CW input power of up to 10 W, has an insertion loss of less than 1.5 dB and a flat leakage of less than 11.5 dBm. https://lnkd.in/dtnUcEGF
To view or add a comment, sign in
-
We've engineered a new wideband MMW circulator, known as the hybrid circulator, boasting a substantially higher bandwidth compared to the Y-junction. It is an enabling technology for broadband transmit/receive applications. Why did we invent the hybrid circulator? We were simply not satisfied with the performance of the Y-junction circulators at MMW frequencies. Even after we squeezed all the bandwidth possible out of our Y-junction using sophisticated impedance matching techniques, any further significant increases in bandwidth are prohibited by limitations in the ferrite material. So, we found another way to implement the circulator function. Get the full details here: https://lnkd.in/gV76yFqW #mmWave #rfengineering #MicroHarmonics #isolators
To view or add a comment, sign in
-
#STF15NM65N These devices are N-channel Power MOSFETs developed using the second generation of MDmeshTM technology. This revolutionary Power MOSFETs associates a vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. N-channel 650 V, 0.35 Ω typ., 12 A MDmeshTM II Power MOSFETs in TO-220FP and I2PAKFP packages • 100% avalanche tested • Low input capacitance and gate charge • Low gate input resistance
To view or add a comment, sign in
-
Polarization Maintaining (PM) Magneto-Optical Switches are a specialized type of optical switch that utilize the magneto-optic effect to control the polarization state of light signals. These switches offer unique advantages in applications where maintaining the polarization integrity of light is critical. #pm #opticalswitch #glsun https://lnkd.in/gcFG3exM
To view or add a comment, sign in
-
The Noisecom J7000B jitter noise generator produces additive white Gaussian noise (AWGN) with a large crest factor to model “real world” random jitter. This random jitter is commonly referred to as Rj in the industry accepted jitter hierarchy model and managing Rj is critical to the performance and capability of high-speed communication busses and devices. Learn more: https://hubs.la/Q02r8N100 #AWGN #TestAndMeasurement
To view or add a comment, sign in
15,254 followers