Corrosionpedia’s Post

𝐒𝐚𝐟𝐞 𝐯𝐨𝐥𝐭𝐚𝐠𝐞 𝐚𝐧𝐝 𝐜𝐮𝐫𝐫𝐞𝐧𝐭 𝐦𝐞𝐚𝐬𝐮𝐫𝐞𝐦𝐞𝐧𝐭 𝐢𝐧 𝐡𝐲𝐝𝐫𝐨𝐠𝐞𝐧 𝐚𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬: Our P40000 series of high voltage transducers ensure maximum reliability and safety for DC voltage and current measurement on hydrogen electrolyzer stacks and strings. Thanks to fully potted electronics, isolation is possible up to 3.6 kV. Learn more about Knick’s high voltage offering here: https://lnkd.in/gEYGWwVM #hydrogen         #electrolyzer    #electricalmeasurement              #highvoltage

Continue with Electrolyzer, The electrolyzer control system looks after the individual stack where stack current adjustment, Cell voltage control, Pulse width modulation, electrolyte flow rate and temperature management are the main monitoring and controlling elements. The H2 production rate from a single cell stack is controlled by the amount of current supplied to the rectifier which converts AC high voltage supply into DC input. The production rate is linear. Thus, the quantity of the hydrogen to be produced is specified as a setpoint and because the hydrogen quantity is a direct function of current, then it is adjusted with the current supplied to the rods. Thanks and Best Regs 😊

Ageing of the Insulators is a key question for transmission grid reliability. Don’t hesitate to take part in our next technical webinar about this topic.

Understanding Active and Passive Filters for Harmonic Mitigation What are Active and Passive Filters in Harmonic Mitigation In power systems, harmonics are unwanted frequencies that distort the ideal sinusoidal waveform of voltage and current. They can cause various issues such as equipment overheating, increased losses, and power quality degradation. To mitigate these harmonics, we use active and passive filters. Here's a closer look at these two types of filters and their roles in harmonic mitigation: #harmonics #powerquality #electricalengineering #activefilters #passivefilters #harmonicmitigation #voltagestabilization #powersystemstability #energyefficiency #systemreliability #technicalsolutions #powersystems #electricalinfrastructure #dynamiccompensation #powerelectronics

Insulators are a key component of transmission line! To make an informed choice between the different technologies, what better way than to have information on the ageing of each type of insulator? Therefore, don't hesitate to take part in our next technical webinar, Alexandre Matte will present a synthesized analysis of high voltage insulators returned from service. https://lnkd.in/ewnSBVcE #electricalengineering #powersystems #highvoltage #transmissionline

Why did we integrate compression, process, and power packaging into our business? Simply put, it optimizes the performance and quality of energy systems… not to mention that it's faster and easier for you to purchase from one supplier. #gascompression #gasprocessing #powergeneration

Winded materials naturally generate static electricity during processing. This electrostatic charge becomes a problem as it affects the behaviour of the substrate during handling. These charges also often attract particles to the web material and cause defects in the uniformity of the coating, which can lead to quality problems. Significant static charges can also cause electrical discharge problems for the operator. 𝐖𝐢𝐭𝐡 𝐇𝐢𝐥𝐝𝐞𝐛𝐫𝐚𝐧𝐝 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲'𝐬 𝐢𝐧𝐭𝐞𝐥𝐥𝐢𝐠𝐞𝐧𝐭 𝐞𝐥𝐞𝐜𝐭𝐫𝐨𝐬𝐭𝐚𝐭𝐢𝐜 𝐝𝐢𝐬𝐜𝐡𝐚𝐫𝐠𝐞 𝐬𝐲𝐬𝐭𝐞𝐦 𝐟𝐨𝐫 𝐜𝐡𝐚𝐫𝐠𝐞 𝐜𝐨𝐧𝐭𝐫𝐨𝐥, 𝐲𝐨𝐮 𝐜𝐚𝐧 𝐫𝐞𝐝𝐮𝐜𝐞 𝐝𝐨𝐰𝐧𝐭𝐢𝐦𝐞, 𝐚𝐜𝐡𝐢𝐞𝐯𝐞 𝐬𝐚𝐟𝐞𝐫 𝐨𝐩𝐞𝐫𝐚𝐭𝐢𝐧𝐠 𝐜𝐨𝐧𝐝𝐢𝐭𝐢𝐨𝐧𝐬, 𝐢𝐧𝐜𝐫𝐞𝐚𝐬𝐞 𝐩𝐫𝐨𝐝𝐮𝐜𝐭𝐢𝐯𝐢𝐭𝐲 𝐚𝐧𝐝 𝐢𝐦𝐩𝐫𝐨𝐯𝐞 𝐩𝐫𝐨𝐝𝐮𝐜𝐭 𝐪𝐮𝐚𝐥𝐢𝐭𝐲. 𝐢𝐎𝐍𝐬𝐭𝐫𝐞𝐚𝐦 𝟒.𝟎 : https://lnkd.in/eU5pp8ST #iONstream 4.0 #AutoDCTechnology® #electrostatic #HildebrandTechnology

What is the use of the diode in series to the coil in a relay? A diode is often used in parallel with a relay coil to dissipate energy stored in coil inductance when the coil is disconnected from the electric circuit. It is also known as freewheeling diode.

About:Energy have written a great blog about thermal control during battery model parameterisation. The importance of thermal control is central to About:Energy's model performance; if you can't control temperature during the experiment, how can you expect to have reliable temperature dependent parameters in the model they produce? Read it here: https://lnkd.in/erG5brCy

Classification and Application of Low Frequency Transformer #ENC #encgroup #transformer #powertransformer #electricaltransformer https://lnkd.in/gKScrur3